electrical insulating mat is 15652 2006

Scope – Covers plain, perforated and ribbed mats for indoor use on floors, platforms and work‑benches. - Material – Natural or synthetic rubber, free from cracks, pinholes or foreign matter; must be oil‑ and ozone‑resistant. - Thickness – Standard sizes: 3 mm, 4 mm, 5 mm, 6 mm (other thicknesses on request). - Voltage Rating – Tested for 1 kV AC (50 Hz) for 1 minute; dielectric strength ≥ 10 kV/mm. - Dimensions – Common sheet sizes: 1 m × 2 m, 1 m × 3 m; tolerances ± 2 % on length/width. - Physical Requirements – - Tensile strength ≥ 5 MPa - Elongation at break ≥ 200 % - Hardness (Shore A) 55–70 - Abrasion loss ≤ 200 mm³ (per 1000 cycles) - Safety Markings – Each mat shall bear: - IS 15652 : 2006 logo - Manufacturer’s name & batch number - Thickness & voltage rating - Date of manufacture & expiry (if applicable) - Testing – Must pass dielectric, tensile, hardness, abrasion and ozone‑resistance tests as per the standard. - Packaging – Rolls or sheets wrapped in moisture‑proof material; each package labelled with specification details. Typical Use Cases - Electrical substations & switchgear rooms - Workshops & laboratories - Home DIY areas with low‑voltage equipment